ASUSTOR 華芸中文官方討論區

我有一部舊 AS-202TE
ADM版本為 2.6.2.R6L2
我在偏好設定 > ADM更新內按下 "立即更新" (目標可供下載的ADM版本為 3.0.2.RA22)
完成 "下載軟體中"，卻卡在 "更新準備中" (無法按下確認，只能按下取消)
請問可以如何解決??

你的版本真的太久了，我記得是要先升級到2.7， 然後再看3.x 的能不能升上去。

http://54.223.174.69:10079/download/adm/?C=M;O=D

AS-202 系列的，應該是要找 x86.....

最新只能更新到 2.7.3.RI21 ，無法更新至 X86_3.1.0.RFQ3 (卡在 "更新準備中" (無法按下確認，只能按下取消))
請間有沒有 3.0.2.RA22 ??

已解決
解決方法是使用其他 brower (e.g. safari)
可參考外國連結
https://support.asustor.com/index.php?/ ... rade-issue

我的AS-202TE目前的ADM版本也是在2.2.1，無法自動更新，從系統中按自動更新進度一直在0%，
手動更新下載最新版的X86_3.4.6.RDF3.img出現您所上傳的ADM版本與系統並不相容或格式有誤，請再次檢查您的檔案。
不知道有朋友有好的解決方法嗎?

Hi, there. I got the similar problems. I found a week ago my single harddisk Asustor NAS prompted me with a red light signal with strange sound releasing from the harddisk(3TB). I then sensed that there must be a problem with my harddisk and I bought a new harddisk (3TB) and had it added to my NAS. The storage was then set to Raid 1, hoping that I could synchronize the defective old harddrive with the new one before it totally crashed. Luckily, I did that and the NAS worked fine with both the old defective drive (3TB on slot 1) and the new one (3TB on slot 2) . I then bought 2 other new drives (4TB) and upgrade my NAS as follows:

1. I removed the defective old drive (3TB) from slot 1 and replaced it with a new drive (4TB) and now the storage was synchronized as Raid 1 with a new 4TB drive (slot 1) and a new 3TB drive (slot 2).
2. After the synchronization, I removed the new 3TB drive from slot 2 and replaced with another new 4TB drive and now the storage was synchronized as Raid 1 with 2 new 4TB drives.
3. However, the disk capacity still remained 3TB although I have replaced the 3TB drive with a 4TB one. I then clicked the function of "Expand Capacity" and the storage then synchronized again.
4. After synchronization, I could not update any apps and it seemed all the web server and the installed apps stopped working. The icons of the installed apps appeared blank. I was prompted with error :ref 5401 when I tried to update any of them.

Please refer to the attache screenshots. I should be much grateful if you could please advise me on how to rectify the above problems. Thanks in advance.

Hi, You can contact

Support.asustor.com

for further product diagnosis!